User manual

258 Insight 2x user manual
Or, for example, if you wanted to move ten events five seconds later in
order to insert a new event into the middle of a program, you could do so
by following these steps:
Keystrokes:
Actions:
1. Press [Setup].
Selects Setup display
2. Press [1][3], SMPTE
Events, and press [Enter].
Selects SMPTE Events display mode
3. Press [S7] until [S1] reads
Select Event.
4. Press [S1], Select Event.
Prompt reads:
Select SMPTE event number
5. Press [1][1] [Thru] [2][0].
6. Press [S2], SMPTE Time.
The time field is highlighted
Prompt reads:
Select SMPTE Time (Press TIME to
edit specific fields
7. Press [Time] [Time].
Selects the seconds field for all ten
events
Prompt reads:
Select SMPTE seconds
8. Press [+] five times.
Each time you press [+], the seconds
field for each event increases by one
second
9. Press [Enter].
Sets the new times