User manual

256 Insight 2x user manual
Moving SMPTE events
The system allows you to move one or more SMPTE events from one
time slot to another. Follow these steps to move a block of SMPTE
events.
Note: To move a single event, you may also use the arrow keys to high-
light the SMPTE time for the event you want to move, then press [+] or
[–] until the new SMPTE time is displayed in the keypad prompt window,
and press [Enter]. Or, use the keypad to enter the new time, then press
[Enter]. The event will move to the new time when you sort the event list
or leave the SMPTE editing screen.
Keystrokes:
Actions:
1. Press [Setup].
Selects Setup display
2. Press [1][3], SMPTE
Events, and press [Enter].
Selects SMPTE Events display mode
3. Press [S7] until [S3] reads
Move Event.
4. Press [S3], Move Event.
Prompt reads:
Select event number(s) to move,
then press ENTER
To cancel, press CLEAR
5. Press [1] [Thru] [5].
Selects events 1 through 5 to move
6. Press [Enter].
Prompt reads:
To move selected event(s), select
time and press ENTER. To cancel,
press CLEAR
7. Press [Time] [Time] [Time]
[5].
Selects five minutes for the first event
to move
8. Press [Enter].
Copies event 1 to a new event starting
at the five minute point; the rest of the
events maintain their original
relationship in time