User manual

254 Insight 2x user manual
Inserting SMPTE events
To add a new SMPTE event to an existing SMPTE program, follow these
steps:
Keystrokes:
Actions:
1. Press [Setup].
Selects Setup display
2. Press [1][3], SMPTE
Events, and press [Enter].
Selects SMPTE Events display mode
3. Use the arrow keys to
select event 4. The new
event will be inserted
before this event.
Corner reads:
Event 4
4. Press [S7] until [S1] reads
Insert Event.
5. Press [S1], Insert Event.
Prompt reads:
Select event number to insert, then
press ENTER
To cancel, press CLEAR
6. Press [Enter].
Prompt reads:
Select number of events to insert,
then press ENTER
To cancel, press CLEAR
7 Press [2].
Indicates that you wish to insert two
new events
Corner reads:
Insert 2
8. Press [Enter].
New events 4 and 5 are inserted; all
following events are renumbered