User manual

chapter 20 control interfaces 237
Configuring MIDI Show Control
Each device receiving MIDI Show Control information must be assigned a
device ID. Insight 2x can receive MSC information, transmit MSC informa-
tion, or both.
To enable input and/or output of MSC and to assign MSC device IDs for
incoming and outgoing data, do the following:
1. Press [Setup] to go to the Setup menu.
2. Press [6] [Enter] to select the Options Settings menu. The following
display appears:
3. Press [2] [Enter]. The message Select MIDI receiver device (#0 -
126), or press DISABLE MIDI to disable MIDI Show Control ap-
pears.
4. Enter the receiver device ID (the ID of the device generating the MSC
signal to which the console is listening). The ID must be between zero
and 126.
5. Press [Enter]. The message Select MIDI transmitter device (#0 -
126), or press DISABLE MIDI to disable MIDI Show Control ap-
pears.
6. Enter the transmitter device ID (the ID of the device to which the con-
sole is transmitting MIDI signal). The ID must be between zero and
126. Press [Enter].
Disable MIDI Show Control
To disable MIDI Show Control from the Options Settings menu, press [2]
[Enter] [S1], Disable MIDI.