User manual

228 Insight 2x user manual
Playing a backup look
Playing a backup look brings up the recorded look on stage. You may play
back a backup look from the console or from a CEM.
Only one backup look may be on stage at a time. If there is a backup look
on stage when you bring up a new one, the second look replaces the first.
Up and down fade times for backup looks are five seconds. They cannot
be modified.
To use the Insight 2x to play a recorded backup look, follow these steps:
Note: To clear a playing backup look follow the procedure listed above, but
enter [0] in step 5 as the backup look number. The currently playing
backup look will be cleared from the stage.
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Select [9], ETCLink Func-
tions, and press [Enter].
Selects ETCLink Functions menu
3. Press [1], Dimming
System Status, [Enter].
Selects Dimming System Status
display
4. Press [S2], Play Backup.
Prompt reads:
Select backup look to play, then
press ENTER (Enter 0 to return to
normal operation)
5. Enter the backup look
number (1-32) and press
[Enter].
Advisory reads:
Play Backup processing has
completed. Press any key to
continue.