User manual

chapter 19 sensor dimming 227
Working with Sensor backup looks
A backup look is a recording of a selected look on stage stored in the
Sensor CEM. The Sensor system allows you to use either your Insight 2x
console or any CEM to bring that look up on stage. You may save and use
up to 32 backup looks.
Recording a backup look
To record a backup look, follow these steps:
Keystrokes:
Action:
1. Use your console to
create the desired look on
stage.
Creates look on stage
2. Press [Setup].
Selects Setup display
3. Select [9], ETCLink Func-
tions, and press [Enter].
Selects ETCLink Functions menu
4. Press [1], Dimming
System Status, [Enter].
Selects System Status display
5. Press [S3], Record
Backup.
Prompt reads:
Select backup look to record, then
press ENTER
6. Enter the backup look
number (1-32) and press
[Enter].
Advisory reads:
Record Backup processing has
completed. Press any key to
continue.