User manual

222 Insight 2x user manual
Load errors
When a dimmer’s load isn’t within 20 percent of its recorded load, it gen-
erates a load error that appears on the Load Management display. The
information shown on the Load Management display includes the dimmer
number, the recorded load of the dimmer, and the actual load the system
has detected for that dimmer.
Follow these steps to list all dimmers that have load errors:
Note: If you have a printer attached to your console, you may print the
Load Errors screen. To print a list of dimmer load errors from this screen,
press [S1], Print Screen. The console sends the Load Error list to the
printer.
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Select [9], ETCLink Func-
tions, and press [Enter].
Selects ETCLink Functions menu
3. Select [4], Load Manage-
ment, and press [Enter].
Selects Load Management display