User manual

chapter 18 accessories 211
Clearing regions
You must be in Designer’s Worksheet Editing display mode to clear indi-
vidual regions . To clear all regions, you can use the Clear Designer’s Work-
sheet option from the Clear Functions menu, as described on page 199.
Note: Clearing regions does not affect the macro assigned to the region.
Clearing a region removes it from the digitizer and the Designer’s Work-
sheet display, and removes the macro assignment.
To clear regions, follow these steps:
Keystrokes:
Actions:
1. Press [Setup].
Selects Setup display
2. Press [7], Designer’s
Worksheet Editing, and
press [Enter].
Selects Designer’s Worksheet Editing
display mode
3. Press [S6], Clear Region .
Prompt reads:
To clear region(s), select region
number(s) and touch ENTER
To cancel, touch CLEAR
4. Press [7].
Selects region 7 to clear
Corner reads:
Region 7
5. Press [Enter] .
Prompt reads:
To confirm, touch ENTER
To cancel, touch CLEAR
6. Press [Enter] to clear the
region or [Clear] to cancel
the action.
Clears region 7 from the Designer’s
Worksheet layout; removes the
assignment of macro 7 to region 7