User manual

206 Insight 2x user manual
Macro controls
The five macro keys allow you to access macros. M1, M2, M3, and M4
allow you to access macros 1,951 through 1,954. M* allows you to enter
any other macro. To access other macros, press [M*], enter the desired
macro number, and press [Enter].
Fader controls
The fader control keys allow you to play back cues in the console's cross-
faders. [Go] controls the AB fader pair; the remaining keys function as on
the console keypad.
Other controls
The remaining controls enable you to select dimmers, channels, groups,
and cues. Keys function as they do on the console keypad.
Connector
Connector for hard wire connection to receiving unit.
Press [On] key on the infrared controller to turn power on. The unit shuts
off after three minutes if no key is pressed. The unit is powered by a 9V,
size PP3 battery.
Console controls and the infrared controller may operate simultaneously.
Changes made from both console and infrared controller are displayed
immediately on the console monitor.