User manual

chapter 2 monitor displays 9
Fader
The Fader display shows you only the levels on stage that have been set
by one or both fader pairs or DMX In. Fader displays do not reflect the
influence of the Grandmaster or inhibitive submasters. The Fader display
shows all levels as they would appear if the Grandmaster and any inhibi-
tive submasters were at Full.
Display mode
Current display mode and time.
Keypad prompt corner
This window indicates how the console will interpret the next number
entered from the keypad . For example, if you press [Channel], the corner
displays Chan, indicating that the console will read the next number as a
channel number. If you enter a range, only the last number in the range
will appear.
Channel level display
Current level of all channels set by either or both faders.
Prompt area
Information and prompts appear here.
Attribute bar
Shows current settings for selected cue, group or submaster.
Softkeys
Fader functions for [S1] through [S8].
Display mode
Keypad corner
Channel
level
display
Prompt
area
Attribute bar
Softkeys