User manual

chapter 14 macros 167
Note: If your macro needs to contain softkeys from display modes other
than the Macro Editing display, you must use Learn to create it.
9. Press [5] [Enter].
Inserts a five second wait into the
macro
Prompt reads:
Select operation(s) for this macro –
press ENTER MACRO when done
(Wheels and sliders are not valid
entries in macros)
10. Enter [Channel] [1] [Thru]
[1][0] [At] [0] [Enter].
Sets channels 1 through 10 at zero
11. Press [Enter Macro].
Concludes macro recording
12. Press [M*] [7] [Enter].
Macro 7 runs. Channels 1 through 5
rise to 50 percent. After five seconds,
channels 1 through 10 rise to Full.
After five seconds, levels drop to zero