User manual

chapter 13 subroutines 163
9. Press [5][5].
Selects a level of 55 percent for the
cue within the subroutine
Prompt reads: Enter upfade time
10. Press [8] [→].
Sets an upfade time of eight seconds
Prompt reads: Enter downfade time
11. Press [→].
Sets a downfade time of eight
seconds
Prompt reads: Enter follow time
12. Press [2][0].
Sets a follow time of 20 seconds. Step
1 is now complete
13. Press [S1], Step, [2]
[Enter].
Selects step 2 to edit
14. Repeat steps 7 through
13, altering attributes as
desired, to add additional
cues as subroutine steps.
15. Press [S1], Step, [6]
[Enter].
Selects step 6 to edit
16. Press [S2], Style, to select
a subroutine style. (You
may need to press [S7],
More Softkeys, first.)
Styles are described on
page 161.
Prompt reads: Select style of
subroutine command
(1 = Loop, 2 = Bounce,
3 = Jump to cue, 4 = Hold for go)
17. Press [3] [Enter].
Selects Jump to cue style for step 6
Prompt reads:
Select cue number
18. Press [8] [Enter].
Selects cue 8 for Jump to cue. When
subroutine reaches step 6, the
subroutine ends and runs cue 8
19. Complete entering all cue
steps and style steps as
described above.
20. Press [Record], enter cue
number, and press [Enter]
to record subroutine cue.