User manual

chapter 2
monitor displays
Insight 2x provides two color video monitors. The Playback display
appears on one monitor. This display provides information regarding your
show, including a cue list, submaster list and the current status of the con-
sole’s two fader pairs. The Command display appears on the other moni-
tor. It provides a variety of displays, which you may choose from the
console. These displays allow you to create and run shows and to config-
ure your console and your lighting system.
Note: Press [Swap] to reverse the monitor each display appears on. Press
the [Expand] key to extend the information appearing on the Command
display onto the Playback display. For example, if you have a screen dis-
playing channels on the Command display, [Expand] allows you to view up
to an additional 125 channels on the Playback display.
If your system includes an ETCNet network, additional monitors may be
installed at other locations, such as backstage or in the sound booth.
These remote monitors show the same displays as the console’s moni-
tors. See Appendix A, Installation , for information about installing remote
monitors.
This chapter includes descriptions of the following displays:
• Stage
• Blind
• Fader
• Flexichannel
• Tracksheet
• Patch
• Park
• Playback