User manual

chapter 12 effects 155
Modifying effects
Insight 2x allows you to modify recorded effects by adding or deleting
effect steps, changing step attributes, and adding or deleting step ele-
ments.
Inserting steps
You can insert a new step at any point in an effect. For example, to insert
a step between steps 4 and 5, follow these steps:
The new step is inserted in place of the old one. The old step 5 becomes
step 6; step 6 becomes step 7 and so on. The timing and level attributes
from step 4 are set as initial defaults in the new step 5.
Keystrokes:
Action:
1. Press [Blind] [Cue] [2].
Selects cue 2 in the Blind display
2. Press [S7], More Soft-
keys.
3. Press [S5], Insert Step.
Prompt reads:
Select step number to insert, then
press ENTER
To cancel, press CLEAR
4. Use the [↑] and [↓] keys to
highlight the step you wish
to insert
or…
Enter the number of the
step.
Prompt reads:
Select step number to insert, then
press ENTER
To cancel, press CLEAR
5. Press [Enter].
Prompt reads:
Select channel numbers
(Precede with AND to add to
existing step, or EXCEPT to delete
from step
6. Enter desired channels
and settings.