User manual

154 Insight 2x user manual
Using a random rate
An effect with a random rate runs at varying speeds, changing at random,
within a range that you select.
The console applies a random rate to the assigned step time and to the
step fade times.
To assign random rate and to select your maximum and minimum rates
(from 0 percent to 2,000 percent), follow the steps below:
Note: You can control an effect’s rate by adjusting the rate of the submas-
ter or cue in which the effect is recorded. Adjusting the rate does not
affect the overall Up/Dwell/Down times for the cue or submaster. It does,
however, speed up or slow down the individual steps.
For more information about controlling cue or submaster rates, see pages
105 and 139.
Keystroke:
Action:
1. Press [Blind] [Cue] [2].
Selects cue 2 in the Blind display
2. Press [S7], More Soft-
keys, [S8], Attribute.
Displays available attributes across the
bottom of the screen
3. Press [S7], Random Rate.
Prompt reads:
Select low random rate
(0 to 2000, 100=Normal)
4. Enter the slowest desired
effect rate. Press [Enter].
Prompt reads:
Select high random rate
(0 to 2000, 100=Normal)
5. Enter the highest desired
effect rate.
6. Press [Enter].
Prompt reads:
Select step number