User manual

chapter 11
submasters
Insight 2x provides you with 108 submasters. A submaster is a group of
channels recorded at proportional levels and controlled by a slider and a
bump button. Submasters enable you to save complex looks you use fre-
quently and play them back manually. They can also be used as building
blocks when you create scenes, cues or other submasters.
A channel may be included in any number of submasters. You can record
a total of 1,080 submasters. (108 submasters in each of ten pages of sub-
master memory.)
Each submaster consists of a slider and a bump button with one or two
LEDs. The slider allows you to bring the submaster look up manually
. The
bump button allows you to flash the submaster to its full recorded level,
or to begin its programmed fade, if it has one. The green LEDs show you
which sliders contain recorded submasters. The red LEDs in the bottom
row indicate whether the submasters are pile-on (green) or inhibitive (red).
This chapter includes the following sections:
• Submaster types
• Submaster pages
• Playback Submaster List
• Submaster LEDs
• Submaster bump buttons
• Recording submasters
• Creating inhibitive submasters
• Modifying submasters in Blind
• Modifying submasters in Stage
• Using Update to modify submasters
• Live control of a submaster
• Controlling submaster fades manually
• Labeling submasters
• Copying submasters
• Loading cues or groups to submasters
• Copying cues or groups to submasters
• Clearing submasters
• Submaster List