User manual

116 Insight 2x user manual
Labeling groups
Insight 2x allows you to use an alphanumeric keyboard to assign labels to
groups. See page 296 for more information about selecting and installing
a keyboard. Group labels can consist of any combination of letters, num-
bers and symbols, and may be up to 16 characters long.
Follow these steps to add a label to a group:
Note: Press [F7] or [F8] on the alphanumeric keyboard to select the previ-
ous group or the next group to label.
Keystrokes:
Action:
1. Press [Blind].
Selects Blind display mode
2. Press [Group] [1].
Prompt reads:
Group mode – To recall a group,
select the number and set it to a
level
To create or modify a group, select
the number and press ENTER
3. Press [Enter].
Prompt reads:
Select channel numbers
4. Press [Label].
Prompt reads:
Type group label
(F6 = clear to end,
F7 = last group label,
F8 = next group label)
5. Use the alphanumeric key-
board to enter a label. Type
“Scene 1 Cyc.”
Corner reads:
Label Scene 1 Cyc
6. On the Insight 2x keypad,
press [Enter].
Group 1 is labeled