User manual

114 Insight 2x user manual
Using Update to modify groups
The Update feature allows you to easily record changed levels on Stage
into a selected group. You may record all levels on Stage into the group,
or you may record only changes to channels that were previously
recorded in the group. You may also add specific new channels to the
group at their current Stage levels, to add all channels on Stage to the
group at their current levels.
Using Update to add new channels to a group
You may use Update to add new channels to an existing group. To do so,
you must specify the channels you wish to add. Follow these steps to use
Update to add channels:
Keystrokes:
Actions:
1. Press [Stage].
Selects Stage display mode
2. Select channels to add to
the group and set their lev-
els.
Alters look
3. Press [S2], Update,
[Group].
Prompt reads:
To update group, select number
and press ENTER
(Press ONLY + ENTER to update
only those channels already in
group)
4. Press [2].
Selects group 2 to update
Corner reads: Group 2
5. Press [Channel].
Prompt reads:
To update channel(s), select
number(s) and press ENTER
To cancel, press CLEAR
6. Specify the channels to
add. In this case, press [5]
[Thru] [1][0].
Corner reads: Chan 10
7. Press [Enter].
Updates group 2 to include channels 5
through 10