User manual

112 Insight 2x user manual
Modifying groups
Insight 2x allows you to modify groups in Stage or Blind modes.
In Blind
Follow these steps to add channels to a group in Blind display mode:
Warning: You must press [Enter] after you enter the group number. If you
do not, Insight 2x displays the channels used in the group, but does not
enter Group Editing mode.
Note: This process can also be used to create a new group in Blind display
mode. If the group number you enter to modify doesn’t exist, it is created
as a new group.
Keystrokes: Action:
1. Press [Blind] . Selects Blind display mode
2. Press [Group]. Prompt reads:
Group mode – To recall a group,
select the number and set it to a
level
3. Press [1]. Selects group 1’s channels
Corner reads: Group 1
4. Press [Enter] . Brings up group 1 in group editing
mode. Channel levels should be white
Prompt reads:
Select channel numbers
5. Press [2][5] [Thru] [3][0]
[At] [5][0].
Modifies look, adding channels 25
through 30 at 50 percent
6. Press [Record]. Prompt reads:
To record group, select number and
press ENTER
To cancel, press CLEAR
7. Press [Enter]. Records group 1 with new levels