User manual

chapter 10 groups 111
Working with groups in Blind
There are two group modes in Blind, Group mode and Group Editing
mode. In Group mode, Insight 2x brings up the channels from a group of
your choice and allows you to use them to modify cues, submasters and
other groups. In Group Editing mode, Insight 2x brings up the selected
group itself and allows you to modify it.
Group mode
To enter Group mode and bring up a group’s channels, follow these steps:
Group Editing mode
To enter Group Editing mode and modify a recorded group, follow these
steps:
Note: Once you are in Group Editing mode, use [S1], Select Group, rather
than [Group], to bring up a different group. Use [Group] to access another
group’s levels as you modify the selected group.
Keystrokes: Action:
1. Press [Blind] . Selects Blind display mode
2. Press [Group] [1]. Selects group 1’s channels
Prompt reads:
Group mode – To recall a group,
select the number and set it to a
level
To create or modify a group, select
the number and press ENTER
3. Press [At] [7][5]. Sets the channels to 75 percent of their
recorded levels
Prompt reads: Group mode – Press
AT or use wheel to alter levels, or
select channel numbers to edit
4. Press [Record] [Cue] [3]
[Enter].
Records the current level settings as
cue 3
Keystrokes: Action:
1. Press [Blind] . Selects Blind display mode
2. Press [Group] [1]. Selects group 1’s channels
Prompt reads:
Group mode – To recall a group, select
the number and set it to a level
To create or modify a group, select
the number and press ENTER
3. Press [Enter]. Selects group 1. Group status bar
appears above softkeys. Channel levels
are white
Prompt reads:
Select channel numbers
4. Add, delete or modify
channels as desired.
5. Press [Record] [Enter]. Records the modified group 1