User manual

108 Insight 2x user manual
Creating groups
You can create groups in Stage, Blind and Fader modes.
To create a group, follow these steps:
Creating a group from the look on stage
To create a group from the look that’s already on stage, follow these
steps:
Keystrokes: Action:
1. Press [Stage]. Selects Live display mode
2. Press [1] [Thru] [5] [Full] [6]
[Thru] [9] [At] [5] [Enter].
Selects channels 1 through 9 and sets
them at proportional levels
3. Press [Record] [Group]. Prompt reads:
To record group, select number and
press ENTER
To cancel, press CLEAR
4. Press [1]. Enters the group number you want to
record
Corner reads: Group 1
5. Press [Enter]. Records group 1
Keystrokes: Action:
1. Press [Stage]. Selects Stage display mode
2. Press [Record] [Group]. Prompt reads:
To record group, select number and
press ENTER
To cancel, press CLEAR
3. Press [2]. Enters the group number you want to
record
Corner reads: Group 2
4. Press [Enter]. Records group 2