User manual

92 Insight 2x user manual
Recording a multipart cue
Follow these steps to record a multipart cue:
Note: You do not need to re-enter the cue number for additional parts. Set
channel levels, press [Record] [Part], enter the part number, and press
[Enter].
Note: Follow, Link and Label attributes may be assigned to the overall cue.
Keystrokes:
Action:
1. Press [Stage].
Selects Stage display mode
2. Press [Channel], select
channels and enter chan-
nel levels, then press
[Enter]. For example,
[Channel] [1] [Thru] [5]
[Full].
The Prompt reads:
Select channel numbers
3. Press [Record], then enter
the number of the cue you
want to record. For exam-
ple, press [1][2].
Indicates that you want to record a cue
Prompt reads:
To record cue, select number and
press ENTER
To cancel, press CLEAR
4. Press [Part], then use the
keypad to enter the
number of the part you
want to record. Parts can
be assigned a number
from 1 to 8 and can be cre-
ated in any sequence.
Enters the part number to record
Prompt reads:
Select part number to record
To cancel, press CLEAR
5. Press [Enter].
6. Repeat steps 2 through 5,
adding channels for each
part you want to include in
the multipart cue.
Records subsequent parts. Maximum
number of parts is eight