Specifications

Insight 3 User Manual, v.3.1 75
Encoder Setup
Level setting controls for Insight 3
In Insight 3, fixture attribute levels may be controlled by wheels, encoders
or by an optional pointing device. All these devices are available with user-
defined assignments on six, selectable pages. For each page, you can
control as many as five attributes with encoders, two attributes with
wheels and two attributes with a pointing device. Generally the pointing
device is used only for pan and tilt attributes, so that means you can
directly control as many as 44 fixture attributes with the encoders and
wheels simply by changing pages.
For each page, attributes are assigned by default to encoders, wheels and
to the two axes of a pointing device. You can change the default
assignments to suit your needs or preferences, such as if your console is
not equipped with a pointing device.
Level setting controls for Insight 2 and 2x
Insight 2 and 2x do not have encoders or multiple page buttons. You can
have these Insight 3 features, however, by purchasing an ETC Moving
Lights module. This small device, which connects to the Digitizer/Serial
port of your console, also allows you to add a pointing device such as a
mouse to your system. See the section in this manual entitled, Moving
Lights Module, page 321, for additional information about this option,
including installation instructions.