Specifications

42 Chapter 4 Patching channels
Labeling dimmers
The console allows you to assign alphanumeric labels to your dimmers.
Dimmer labels may be up to five characters long and may consist of any
combination of characters, including letters, numbers and symbols.
You can also hide or view labels you have assigned to dimmers. Press
[S8], Show/Hide Labels, to toggle between these conditions. Hiding
labels provides space to show additional dimmers.
This example demonstrates how to assign a label to a dimmer:
Keystrokes:
Action:
1. Press [Patch].
Selects Patch display
2. Press [5] [Label].
Selects dimmer 5 to label
Prompt reads:
Type dimmer label
(F6 = clear to end,
F7 = last dimmer label,
F8 = next dimmer label)
3. Use the alphanumeric
keyboard to type “House.”
Corner reads: Label House
4. Press [Enter] on the
console’s keypad.
a
a. If you wish to label another dimmer, press [F7] or [F8]
in Step 4 instead of [Enter]. The console records the
current dimmer’s label, and brings up the previous or
next dimmer to be labeled.
Dimmer 5 is labeled “House”