Specifications

Insight 3 User Manual, v.3.1 35
Naming the show
You can use an alphanumeric keyboard to name the show currently loaded
in the console.
14
The names you give shows can consist of letters,
numbers or the symbols: #, %, &, *, (, ), +, ‘, –, [, ], / as well as the comma
and period. Press the [Home] or [End] keys to move to the front or the end
of a label, respectively.
You may enter the name using overwrite or insert mode. Press [Insert] on
the keyboard to switch between insert and overwrite. In overwrite, you
type over any previously entered characters; in insert, each new character
pushes the previously entered characters one space to the right.
To name the show in your system, follow these steps.
14.
See Alphanumeric keyboard, page 318, for information about
installing an alphanumeric keyboard.
Keystrokes: Action:
1. Press [Setup]. Selects Setup display
2. Press [S1], Show Name. Prompt reads:
Type show label
(F6 = clear to end)
3. Enter the name you want
to give the show on the
alphanumeric keyboard.
The show name can have
up to 20 characters.
New name appears in corner of screen
4. Press [Enter] on the
alphanumeric keyboard or
console to record the
name, or press [Esc] to quit
and return to Setup
display.
Show is named