Specifications

Insight 3 User Manual, v.3.1 27
Setting Designer’s Worksheet options
The Designer’s Worksheet Setup display, shown below, allows you to
specify which of three different ETC templates you will use. Two
templates are available for the 12x12 inch Kurta digitizer and one template
for the 12x17 inch Kurta digitizer.
11
Note in the display that there are two choices for the 12x12 inch
digitizer. Choice #1 is made when you want the freedom to control
faders, submasters or the Grandmaster sliders from either the
console or from the Designer’s Worksheet. Choice #2 is made when
you are satisfied to have those slider controls always at the console
and want more programmable space on the Designer’s
Worksheet.The third option in the display is for the 12x17 inch
digitizer. This choice does not allow for the reassignment of control
of faders, submasters or the Grandmaster.
11.
See Designer’s Worksheet, page 313, for information about the
digitizers and templates available for the Designer’s Worksheet.