Specifications

350 Appendix B References
Fuses
The Remote Interface Unit contains two pop-out 6.25 Amp fuses at the
left side of the rear panel. Inspect and replace as explained under
Replacing fuses, page 324.
Remote Video Interface (RVI)
The Remote Video Interface provides ports for remote accessories. It
supports monitors, an alphanumeric keyboard and an RFU, and provides
a serial port for a digitizer. The illustrations below show the RVI’s front and
back panels and indicate the connector used by each accessory.
ETCNet Remote Video Interface back panel
ETCNet Remote Video Interface front panel
Fuses
The RVI contains a 6.25 Amp power fuse in a recessed tray at the right
side of the rear panel. Inspect and replace this fuse as explained under AC
Input fuses, page 325.
The RVI unit also contains a 1.5 Amp fuse to protect the RFU circuit. This
fuse is contained in a pop-out receptacle located near the middle of the
rear panel. Inspect and replace this fuse as explained under RFU / Remote
I/O fuse, page 325.