Specifications

294 Chapter 24 Control interfaces
Using DMX In to set levels
You may be interested in having your cues or other recorded elements
reflect DMX In levels continuously, not just at one point in time. The
console allows you to do that by recording with reference to focus point
0, which always contains the current value of DMX In after DMX In is
enabled.
The following procedure illustrates how to record a cue with reference to
focus point 0. Assume for this example that DMX In was enabled for
channels starting at channel 600.
Viewing DMX In
View DMX In channels with the Fader display. Either choose option 5
when entering the Fader display or press [S1], Select Fader, while you’re
in the Fader display.
Keystrokes: Action:
1. Press [Stage].
Selects the stage display
2. Press [Channel] [6][0][0]
[Thru] [6][9][9] [Focus
Point] [0] [Enter].
Sets channels 600 - 699 at levels
established in focus point 0
3. Press [Record] [Cue] [5]
[Enter].
Records cue 5