Specifications

Insight 3 User Manual, v.3.1 293
Working with DMX In and focus point 0
After enabling DMX In, you can record DMX In levels in the Stage or Fader
displays or you can record all active channels except DMX In. You can
record using focus point 0 or except focus point 0 without first enabling
DMX In.
The following procedure illustrates the use of the DMX In softkey in the
Stage display.
Keystrokes: Action:
1. Press [Setup]. Selects Setup menu
2. Press [6] [Enter]. Selects Options Settings menu
3. Press [3] [Enter]. Prompt reads:
Select DMX512 In starting channel
(Enter 0 to disable)
4. Press [1][0][0] [Enter].
a
a. Make sure you have enough channels to accommodate all
DMX In channels. For an Insight 3 with 512 channels, you
must set the DMX In starting channel at 1 to use all 512 DMX
In channels.
Enables DMX In and specifies channel
100 as the first channel to receive DMX
In signals
Keystrokes: Action:
1. Press [Stage].
Selects the stage display
2. Press [Record] [5].
Prepare to record to cue 5
3. Press [S7], More
Softkeys, until [S4] reads
DMX In.
4. Press [S4], DMX In,
[Enter].
a
a. Press [Except] before pressing [S4] in this step to record all
active channels except DMX In channels.
Selects DMX In channels
5. Press [Enter].
Records DMX In levels to cue 5