Specifications

Insight 3 User Manual, v.3.1 155
Chapter 13
Submasters
Insight 3 provides you with 108 submaster sliders. A submaster is a group
of channels recorded at proportional levels and controlled by a slider and
a bump button. Submasters enable you to save complex looks you use
frequently and play them back manually. They can also be used as building
blocks when you create scenes, cues or other submasters.
A channel may be included in any number of submasters. You can record
a total of 1,080 submasters (108 submasters in each of ten pages of
submaster memory).
Each submaster slider is accompanied by a bump button and one or two
LEDs. The slider allows you to bring up the submaster look manually. The
bump button allows you to flash the submaster to its full recorded level or
to begin its programmed fade, if it has one. The green LEDs show you
which sliders control recorded submasters. The green LEDs in the bottom
row glow when the submaster is an effect or pile-on type. A glowing red
LED in the bottom row signifies a recorded inhibitive submaster.
This chapter includes the following sections:
• Submaster types
• Submaster pages
• Playback Submaster List
• Submaster LEDs
• Submaster bump buttons
• Recording submasters
• Creating inhibitive submasters
• Modifying submasters in Blind
• Modifying submasters in Stage
• Using Update to modify submasters
• Live control of a submaster
• Controlling submaster fades manually
• Labeling submasters
• Copying submasters
• Loading cues or groups to submasters
• Copying cues or groups to submasters
• Clearing submasters