Specifications

100 Chapter 7 Cues
Updating cues
Update allows you to modify previously recorded cues, groups,
submasters or focus points in Stage or Fader. Update takes levels from all
captured and selected channels, and those selected may be restricted
with the Only command.
19
Updating an active cue
The following procedure illustrates how to update a cue that has been
played back.
19.
For an explanation of captured channels, see Channel modes, page
54. For an explanation of Only, see The Only command, page 8.
Keystrokes:
Action:
1. Press [Stage].
Selects Stage display mode
2. Press [Cue], enter cue
number and press [Go].
Plays back selected cue, bringing up
its current levels
3. Modify channel levels as
desired.
Sets cue levels or selects additional
channels and sets their levels
4. Press [S2], Update.
Prompt reads:
To update cue, select number and
press ENTER (TRACK + ENTER for
tracking) To cancel, press CLEAR
5. To restrict channels in the
update, use Only here.
a
a. Optional step.
Selects channels to update
Prompt reads:
Select channel numbers
To cancel, press CLEAR
6. Press [Enter].
b
b. If you want the update to track into subsequent cues, press
[Track] before pressing enter.
Updates the active cue