Specifications
Source Four
™
50º
450 Series
Americas
■
3030 Laura Lane, P.O. Box 620979, Middleton, WI 53562-0979 USA
■
Tel: +1 608 831 4116
■
Fax: +1 608 836 1736
■
Toll free: 800 688 4116
■
Toll free fax: 800 555 8912
Europe
■
Unit 5, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK
■
Tel: +44 (0)20 8896 1000
■
Fax: +44 (0)20 8896 2000
Asia
■
Room 605-606, Tower III Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong
■
Tel: +852 2799 1220
■
Fax: +852 2799 9325
Web: www.etcconnect.com
■
Email: (US) mail@etcconnect.com
■
(UK) mail@etceurope.com
■
(Asia) mail@etcasia.com
Source Four
®
products protected by U.S. Patent Numbers 5,268,613, 5,345,371, 5,544,029, 5,446,637 and 5,775,799; Japanese Patent Number 2,501,772; US and International Patents Pending.
Copyright © 2002 ETC, Inc. All Rights Reserved. All product information and specifications subject to change. 7060L1010 Rev. C Printed in USA 05/02
36000
30000
24000
18000
12000
6000
0
PHOTOMETRIC
For illumination with any lamp, multiply the candlepower of a beam spread by the
multiplying factor (mf) shown for that lamp.
To determine illumination in footcandles or lux at any throw distance, divide
candlepower by distance squared.
For Field diameter at any distance, multiply distance by .95
For Beam diameter at any distance, multiply distance by .60
Metric Conversions: For Meters multiply feet by .3048
For Lux multiply footcandles by 10.76
33°
51°
Beam Angle
Field Angle
50°
Distance (ft) 10 15 20 25
Field Diameter (ft) 9.5 14.3 19.0 23.8
Illumination (fc) 349 155 87 56
(flat field)
0 2 4 6 8 10121416182022242628
Candela
Degrees
PHYSICAL
All photometric data in this document was prepared using standard production
fixtures, and the Prometric™ CCD measurement system. Fixtures were adjusted for
cosine distribution, and were tested with a calibrated HPL 750/115V 21,900 lumens
lamp at its rated voltage. All data were normalized to nominal lamp lumens.
Candlepower Distribution Curve (cosine)
12.4"
31cm
21.3"/54cm
6.8"
17cm
Source Four Weights
Model Fixture Weight* Shipping Weight
lbs kgs lbs kgs
50° 14 6.3 20 9.1
*77V lamps are intended for use with the ETC Dimmer Doubler™.
Warning: Use of lamps other than HPL will void UL/cUL safety approval and
product warranty. Source Four is rated for 750W maximum.
Initial Color Average
Lamp code Watts Volts Lumens Temp. Rated Life MF
HPL 750/115 750 115 21,900 3,250˚ 300 1.00
HPL 575/115 575 115 16,520 3,250˚ 300 0.87
HPL 575/115X 575 115 12,360 3,050˚ 2000 0.66
HPL 575/120 575 120 16,460 3,250˚ 300 0.87
HPL 375/115 375 115 10,540 3,200˚ 300 0.55
HPL 375/115X 375 115 8,060 3,000˚ 1000 0.43
HPL 550/77* 550 77 16,170 3,250˚ 300 0.87
HPL 550/77X* 550 77 12,160 3,050˚ 2000 0.66
HPL 750/230 750 230 19,400 3,200˚ 300 0.90
HPL 750/240 750 240 19,400 3,200˚ 300 0.90
HPL 575/230 575 230 14,900 3,200˚ 400 0.76
HPL 575/240 575 240 14,900 3,200˚ 400 0.76
HPL 575/230X 575 230 11,780 3,050˚ 1500 0.61
HPL 575/240X 575 240 11,780 3,050˚ 1500 0.64
HPL 375/230X 375 230 7,800 3,050˚ 1000 0.38
HPL 375/240X 375 240 7,800 3,050˚ 1000 0.38
Source Four 50° cosine
Degree Candlepower Field Lumens Beam Lumens Efficiency
50° 34,900 12,400 8,220 56.6%
CTE
8.5"
22cm
20.1"/52cm
22.8"/58cm
10.0"/25cm max.
6.9"/17cm min.
14.9"/37.8cm max.
11.8"/29.9cm min.
* Add 2.3 lbs for C-clamp
Barbizon Light WPI Submittal Package Page 38 of 43










