User's Manual
Table Of Contents
- Chapter 0 - Front Cover
- Chapter 0 - Table of Contents
- Chapter 1 - Introduction
- Chapter 2 - Starting Out
- Chapter 3 - Example Applications
- Chapter 4 - Utilities and Features
- Chapter 5 - Web Configuration Manager
- Chapter 6 - Serial Configuration and Applications
- Chapter 7 - Bridging and Mesh Networking
- Chapter 8 - Antenna Setup
- Apx A - Licensing Information
- Apx B - Interface Ports
- Apx C - Radio Configuration
- Apx D - Security
- Apx E - Troubleshooting
- Apx F - Horizon 2.4 Specifications
- Apx G - Horizon 900 Specifications
- Apx H - Horizon 4.9 Specifications
- Apx I - Horizon 5.8 Specifications
APPENDIXC
RADIOCONFIGURATION
Revised: 27 Jan 2017 APX C-12 ESTeem Horizon Series
SETTINGRFPOWERLEVEL
TheESTeem Hor izonpeak power isadjustablein outputpowerfrom theadvanced configuration menu.Theoutput power is
adjusted on the Advanced Menu>Wireless LAN Settings>wlan0 device screen (Figure 4) of the Web Configuration Manager.
SelectthevalueandpresstheSaveSettingsbutton.
Max(Maximum) FullPower
Hi(High) 75%Power
Lo(Low) 50%Power
Min(Minimum) 25%Power
Figure5:PowerLevelSettings
Figure4:AdvancedGlobalVariables