User's Manual
Table Of Contents
- Chapter 0 - Front Cover
- Chapter 0 - Table of Contents
- Chapter 1 - Introduction
- Chapter 2 - Starting Out
- Chapter 3 - Example Applications
- Chapter 4 - Utilities and Features
- Chapter 5 - Web Configuration Manager
- Chapter 6 - Serial Configuration and Applications
- Chapter 7 - Bridging and Mesh Networking
- Chapter 8 - Antenna Setup
- Apx A - Licensing Information
- Apx B - Interface Ports
- Apx C - Radio Configuration
- Apx D - Security
- Apx E - Troubleshooting
- Apx F - Horizon 2.4 Specifications
- Apx G - Horizon 900 Specifications
- Apx H - Horizon 4.9 Specifications
- Apx I - Horizon 5.8 Specifications
CHAPTER5
WEBCONFIGURATION
Revised: 25 Jan 17 5-3 ESTeem Horizon Series
CPUStatus
The Status Menu provides a summary of the
current mode of operation, system time,
processor usage, internal temperature and
status of the communication links to other
wirelessdevices.Anexampleisshownbelowin
Figure 5.Most of the communication
troubleshooting is done in this section of the
WebConfigurationManager.
WirelessStat u s
The Wireless Status submenu lists the
connectedwirelessdevices(Horizon’sor802.11
clients),theirsignalstrength,datarateandtime
of last packet sent.Press the Wireless Status
link and Peer Status Table will be displayed
(Figure 6).For a detailed analysis of the
informationprovidedinthistable,pleasereviewAppendixE–Troubleshooting.
AssociatedStation–ThissectionwilllistalltheassociatedstationsthatareattachedtotheAccessPoint.Thesecouldbeother
Horizon’sinoneofthethreeClientmodesor 802.11devices.
Peers – This section will list all connected Horizon peers (Ethernet Bridge links) by their Wireless MAC address.For detailed
informationonpeerlinks,bridgingandwirelessMesh,seeChapter7–WirelessBridgingand MeshFeatures.
AccessPoints–Thissectionwilllistallother802.11AccessPointsthataresharingtheoperatingchannel(frequency)oftheHorizon.
Youcanalsonotethatthe Peerslistedabovearealsoincludedinthislist.
Figure5:StatusScreen
Figure6:PeerTableScreen