User's Manual
Table Of Contents
- Chapter 0 - Front Cover
- Chapter 0 - Table of Contents
- Chapter 1 - Introduction
- Chapter 2 - Starting Out
- Chapter 3 - Example Applications
- Chapter 4 - Utilities and Features
- Chapter 5 - Web Configuration Manager
- Chapter 6 - Serial Configuration and Applications
- Chapter 7 - Bridging and Mesh Networking
- Chapter 8 - Antenna Setup
- Apx A - Licensing Information
- Apx B - Interface Ports
- Apx C - Radio Configuration
- Apx D - Security
- Apx E - Troubleshooting
- Apx F - Horizon 2.4 Specifications
- Apx G - Horizon 900 Specifications
- Apx H - Horizon 4.9 Specifications
- Apx I - Horizon 5.8 Specifications
CHAPTER4
UTILITIES&FEATURES
Revised: 25 Jan 17 4-5 ESTeem Horizon Series
CONFIGURINGTIMESERVER
EnablingNTPtimesynchronizationservicesontheHorizonwillallowusageoftimeservicesfromupstreamservicestokeepthe
timeonthesystemaccurate.
Toallowtimesynchronization,theHorizonmustbeconfiguredwiththeNTPDaemonenabledandtheappropriateIPaddressof
theupstreamnetworkNTPserver.
1. SelectAdv
ancedfromthemenuitemsandGlobalVariables(Figure7).
2. PresstheNe xtbuttonandFigure9willbedisplayed.AtthebottomofthepagearetheNTPserverconfigurations.
3. TheNTPdaemonisenabledbyselectingONforNTPClient(Figure9).Whenenabled,theNTPdaemonwillusetime
servicesfrom upstre amservicestokeepthetimeonthissystemaccurate.
4. Next,theNTPServershouldbeconfiguredto“On,”ifyouwanttoallowthesy
stemtoprovideNTPserviceforclients
wishingtimesynchronization(Fig ure9).
5. ThefinalstepinconfiguringNTPservicesistoentertheIPaddressorthehostnameoftheupstreamNTPserver.Once
configurationiscomplete,presstheAcceptbutton.
6. Tocompletetheconfiguration,select“CommitandReboot.”TheHorizonwillnowcommittheconfigurationchanges
andreboot.
Figure9:NTPSettings