User's Manual
Table Of Contents
- Chapter 0 - Front Cover
- Chapter 0 - Table of Contents
- Chapter 1 - Introduction
- Chapter 2 - Starting Out
- Chapter 3 - Example Applications
- Chapter 4 - Utilities and Features
- Chapter 5 - Web Configuration Manager
- Chapter 6 - Serial Configuration and Applications
- Chapter 7 - Bridging and Mesh Networking
- Chapter 8 - Antenna Setup
- Apx A - Licensing Information
- Apx B - Interface Ports
- Apx C - Radio Configuration
- Apx D - Security
- Apx E - Troubleshooting
- Apx F - Horizon 2.4 Specifications
- Apx G - Horizon 900 Specifications
- Apx H - Horizon 4.9 Specifications
- Apx I - Horizon 5.8 Specifications
CHAPTER3
EXAMPLEAPPLICATIONS
Revised: 27 Jun 16 3-17 ESTeem Horizon Series
ROUTERADDRESSINGEXAMPLES
ThefollowingareexamplesoftheIPaddressingandsubnetsrequiredfortheESTeemRoutermodes.
PointtoPointAccessPointRoutertoStationRouter
AP Router
Wireless IP Address: 172.16.1.6
Netmask: 255.255.0.0
Default Route: 172.17.1.6
Ethernet IP Address: 172.17.1.6
Netmask: 255.255.0.0
Static Route: 172.20.0.0
255.255.0.0
gateway: 172.16.2.22
Station Router
Wireless IP Address: 172.16.2.22
Netmask: 255.255.0.0
Default Route: 172.16.1.6
Ethernet IP Address: 172.20.2.22
Netmask: 255.255.0.0
Device
IP address: 172.17.X.X
Netmask: 255.255.0.0
Default gateway 172.17.1.6
Device
IP address: 172.20.X.X
Netmask: 255.255.0.0
Default gateway 172.20.2.22
Figure28:APRouterAddressingExample