User's Manual
Table Of Contents
- Chapter 0 - Front Cover
- Chapter 0 - Table of Contents
- Chapter 1 - Introduction
- Chapter 2 - Starting Out
- Chapter 3 - Example Applications
- Chapter 4 - Utilities and Features
- Chapter 5 - Web Configuration Manager
- Chapter 6 - Serial Configuration and Applications
- Chapter 7 - Bridging and Mesh Networking
- Chapter 8 - Antenna Setup
- Apx A - Licensing Information
- Apx B - Interface Ports
- Apx C - Radio Configuration
- Apx D - Security
- Apx E - Troubleshooting
- Apx F - Horizon 2.4 Specifications
- Apx G - Horizon 900 Specifications
- Apx H - Horizon 4.9 Specifications
- Apx I - Horizon 5.8 Specifications
CHAPTER3
EXAMPLEAPPLICATIONS
Revised: 27 Jun 16 3-16 ESTeem Horizon Series
StationRouterandStationMasquerade
6. Toconfigurethetwoothermodems,double‐clickontheiricons
to bring up the ESTeem Summary window and press the Edit
button(Figure20).
7. Select StationRouterforZ‐14001andStationMasqueradefor
Z‐14002intheModeofOperation(Figure26).PresstheNext
buttonatthebottomofthewindowtocon
tinue.
8. ContinuethroughtheconfigurationscreenssettingtheStation
Router/MasqueradeaddressingtomatchtheIPaddressranges
foryournetwork.For helpwithsetting therouter addressing
pleaserefertoRouterAddressExampleslaterinthischapter.
9. Verify the encryption settings are corre
ct for the 802.11 AP
networkinwhichtheEtherStationmodemwillbeworkingand
presstheFinishbuttontoreturntotheconfigurationpage.
10. Verify allESTeemmodemsareconnectedtothesameswitchas
the computer running the ENC Utility and send the
configuration to allmodems at the same time by s
electing
ESTeem>ESTeem Configuration>Send Configuration to All
ESTeems.OncetheENCUtilityhasdownloadedtheconfigurationforbothESTeemHorizons,thestatusboxaroundthe
ESTeemswillchangefromyellowtoblue.ThisindicatesthattheconfigurationwascompletedsuccessfullyandtheESTeem
Horizonsarer
eadytobeinstalledintheapplication.
802.11AccessPointModes(Figures6‐8)
AccessPointBridge,RouterorMasqueradeModes
Configuringthe ESTeemHorizon asanAccessPointfor
802.11clients(asseenFigures6‐8)isexactlythesameas
configuration for AP Bridge, AP Router and AP
Masqueradeasshownabove.Theonlydifferencebeing
that a wireless link is only added between ESTeem
Horizons where a wireless connection is necessary.In
figures6an
d7therewouldbenowirelesslinklistedin
theENCUtility.Infigure8,theconfigurationwouldbe
exactly as shown in Figure 2 with the addition of the
mobileclientsinthenetwork.
The802.11clientswillusetheSSIDconfiguredduringth
e
setup of the network with the ENC Utility. The
encryptionwillbesetatthefactorydefaultsettingsfor
clients(WPAPSK).Toadjusttheencryptiontype,right‐
mouse click on the ESTeem icon and select
Change>ChangeESTeemEncryption(Figure27).
Figure26:ModeofOperationSelection
Figure27:EncryptionConfiguration