User's Manual
Table Of Contents
- Chapter 0 - Front Cover
- Chapter 0 - Table of Contents
- Chapter 1 - Introduction
- Chapter 2 - Starting Out
- Chapter 3 - Example Applications
- Chapter 4 - Utilities and Features
- Chapter 5 - Web Configuration Manager
- Chapter 6 - Serial Configuration and Applications
- Chapter 7 - Bridging and Mesh Networking
- Chapter 8 - Antenna Setup
- Apx A - Licensing Information
- Apx B - Interface Ports
- Apx C - Radio Configuration
- Apx D - Security
- Apx E - Troubleshooting
- Apx F - Horizon 2.4 Specifications
- Apx G - Horizon 900 Specifications
- Apx H - Horizon 4.9 Specifications
- Apx I - Horizon 5.8 Specifications
CHAPTER3
EXAMPLEAPPLICATIONS
Revised: 27 Jun 16 3-14 ESTeem Horizon Series
3. Bydefault,theENCUtilitysetsallESTeemmodemsinAPBridgemode.
TochangethePlantRouterESTeemtoAPRoutermode,double‐clickon
the icon to bring up the ESTeem Summary window and press the Edit
button(Figure20).
4. Change the Mode of Operation from AP Brid
ge to AP Router
(orMasqueradeifdesired)andpress theNext buttonatthe bottomof
thewindow(Figure21).
5. Continue through the configuration screens setting the AP Router
addressingtomatchtheIPaddressrangesforyournetwork.Forhelp
with setting the router addressing please refer to Ro
uter Address
Exampleslaterinthischapter.Youwillend onthescreeninFigure
22.PresstheFinishbuttontoreturntotheconfigurationpage.
6. VerifyallESTeemmodemsareconnectedtothesameswitchasthe
computerrunning theENCUtility andsend th
econfigurationto all
modems at the same time by selecting ESTeem>ESTeem
Configuration>Send Configuration to All ESTeem’s.Once the ENC
UtilityhasdownloadedtheconfigurationforbothESTeemHorizons,
thestatusboxaroundtheESTeem’swillchangefromyellowtoblue.
Thisindicatesthattheconfigurationwascompletedsuccessfullyand
theESTeemHo
rizonsarereadytobeinstalledintheapplication.
Figure21:APRouterConfiguration
Figure20:ESTeemSummaryPage
Figure22:ESTeemSummaryPage