User's Manual
Table Of Contents
- Chapter 0 - Front Cover
- Chapter 0 - Table of Contents
- Chapter 1 - Introduction
- Chapter 2 - Starting Out
- Chapter 3 - Example Applications
- Chapter 4 - Utilities and Features
- Chapter 5 - Web Configuration Manager
- Chapter 6 - Serial Configuration and Applications
- Chapter 7 - Bridging and Mesh Networking
- Chapter 8 - Antenna Setup
- Apx A - Licensing Information
- Apx B - Interface Ports
- Apx C - Radio Configuration
- Apx D - Security
- Apx E - Troubleshooting
- Apx F - Horizon 2.4 Specifications
- Apx G - Horizon 900 Specifications
- Apx H - Horizon 4.9 Specifications
- Apx I - Horizon 5.8 Specifications
APPENDIXI
HORIZON5.8 SPECIFICATIONS
Horizon5.8GHzSpecifications
Revised: 25 Jan 17 APX I-1 ESTeem Horizon Series
Frequency of Operation (Software Selectable) 5.745 to 5.825 GHz (17-channels)
RF Data Rate 6 to 300 Mbps
Tx Output Power (Software Selectable) 250 mW (24dBm)
Channel Bandwidth 5 MHz, 10 MHz, 20 MHz or 40 MHz
Tx Output Impedance 50 ohms
Rx Sensitivity -93 to -73 dBm
FCC Type Acceptance TV7R11E5HND
Industry Canada Type Acceptance Not Approved
LED Indicators Power (On/Off) - Carrier Detect (On/Off) - Transmitter (On/Off) - Reveiver (On/Off)
Receive 250 ma @ 12 VDC
Transmit 1250 ma @ 12 VDC
PoE Power Supply (IEEE 802.3at,30 watts) (opt)
External Power Input 10 to 16 VDC @ 1250 ma
Ethernet Port 1 (10/100/1000)
Ethernet Port 2 (10/100/1000)
802.11 Compatibility 802.11n/a
RS-232C Comm Port (2,400 to 115.2 K baud)
RS-232C Programming Port (38,400, N, 8, 1)
Antenna Input/Outputs TNC Reverse Female
External DC Input Power Mini-Combicon, 3 pin female
Temperature Range -30° to +60° C
Humidity 95% Non-condensing
Dimensions 1.9 in. H x 6.7 in. W x 6.2 in. L
Weight 1.25 lbs.
Product Warranty 1 Year
Outdoor Pole Mt. Kit AA195PM (opt)
PoE Power Supply AA175.2 (opt)
GPS Location Optional (Factory Installed)
Other
RJ-45 Female
RJ-45 Female
ESTeem Horizon 5.8 Specifications
Transmiter/Receiver
Power Requirements
Input/Output Connectors
Case