User's Manual

APPENDIX F
210M SPECIFICATIONS
Antenna Specifications
Revised: 4 Mar 13 APX G-3 EST P/N AA107-210CM
Model No: AA19M
Antenna Type:
Omni-Directional, ½ Wave over ¼ Wave
Model AA19C
Applications: Mobile Mount.
Frequency:
150-174 MHz
Polarization:
Vertical
Impedance:
50 ohms
Gain:
Unity
VSWR: <
1.5 to 1
Front To Back Ratio: n/
a
Horizontal Beamwidth: n/
a
Vertical Beamwidth:
60 degrees
Antenna Material:
Rubber duck whip.
Mounting Hardware:
Magnetic base.
Antenna Connector:
TNC with 12 feet integral RG-58 cable.
Antenna Envelope: 11 i
n. length. Magnetic base 3.5 in. by 3 in by 1 in.
Weight:
1 lb. 5 oz.
Model No: AA20M
1.5 in.
9 in.
Drawing Not To Scale
5/16 in.
Diameter
52 in.
21 in.
Model AA20M
Antenna Type: Omni-Directional, DC grounded, Collinear 5/8 wave
Applications:
Fixed base or mobile mounting. L shaped mounting
bracket may be removed for panel mounting. Ground
plane radials may be removed depending on application.
Frequency: 150 to 175 MHz
Polarization:
Vertical
Impedance:
50 ohms
Gain:
3.0 dBd with ground plane radials
VSWR: <
1.5
Front To Back Ratio: n/
a
Horizontal Beamwidth: n/
a
Vertical Beamwidth:
60 degrees
Antenna Material:
Stainless steel whip and ground plane radials. All other
hardware anodized metal.
Mounting Hardware:
Stainless steel clamps for mounting to ¾ in. to 1.5 in.
pipe with right angle mount or direct mount.
Antenna Connector:
UHF Female (SO-239)
Antenna Envelope: 61 i
n. length by 43.5 in. width with ground plane radials
Weight:
2 lbs.