User's Manual

APPENDIX F
210C SPECIFICATIONS
Antenna Specifications
Revised: 4 Mar 13 APX F-3 EST P/N AA107-210CM
Model No: AA19C
Antenna Type:
Omni-Directional, ½ Wave
Model AA19C
Applications: Mobile Mount.
Frequency:
450 to 470 MHz - AA19C
400 to 420 MHz - AA19F
Polarization:
Vertical
Impedance:
50 ohms
Gain:
2 db.
VSWR: <
2 to 1
Front To Back Ratio: n/
a
Horizontal Beamwidth: n/
a
Vertical Beamwidth:
60 degrees
Antenna Material:
Rubber duck whip.
Mounting Hardware:
Magnetic base.
Antenna Connector:
TNC with 12 feet integral RG-58 cable.
Antenna Envelope: 16 i
n. length. Magnetic base 3.5 in. by 3 in by 1 in.
Weight:
1 lb. 5 oz.
Model No: AA20C
.1
Antenna Type:
Omni-Directional, DC grounded, Collinear 5/8 wave
over 1/2 wave.
Model AA20C.1
Applications:
Fixed base or mobile mounting. L shaped mounting bracket
may be removed for panel mounting. Ground plane radials
may be removed depending on application.
Frequency: 450 to 470 MHz - AA20C.1
Polarization:
Vertical
Impedance:
50 ohms
Gain:
4.5 dB.
VSWR: <
1.5
Front To Back Ratio: n/
a
Horizontal Beamwidth: n/
a
Vertical Beamwidth:
30 degrees
Antenna Material:
Stainless steel whip and ground plane radials. All other
hardware anodized metal.
Mounting Hardware:
Stainless steel clamps for mounting to ¾ in. to 1 /2 in. pipe
with right angle mount or direct mount.
Antenna Connector:
N-Type Female
Antenna Envelope: 37 ½ i
n. length by 16 in width with ground plane radials.
Weight:
2 lbs.