User's Manual

CHAPTER 3
EXAMPLE APPLICATIONS
in the repeater Mesh configuration (Figure 17). For detailed instruction on Mesh network configuration, refer to Chapter
7 of this User’s Manual.
Figure 16: Backup Link Configuration
4. Verify all ESTeem
modems are
connected to the same switch as
the computer running the ENC
Utility and send the configuration
to all modems at the same time
by selecting ESTeem>ESTeem
Configuration>Send
Configuration to All ESTeems.
Once the ENC Utility has
downloaded the configuration for
both ESTeem 210’s, the status
box around the ESTeem‘s will
change from yellow to blue. This
indicates that the configuration
was completed successfully and
the ESTeem 210’s are ready to be
installed in the application.
Figure 17: Mesh Network Configuration
Revised: 5 Dec 12 3-10 EST P/N AA107-210CM