User's Manual

APPENDIX C
MODEL 192 INTEGRATION
Revised: 24 Jan 14 APX D-4 EST P/N AA107-195CM
SIGNAL STRENGTH VS DATA RATE
The average signal strength required to maintain a specific data rate will vary by ESTeem 195C/M model and bandwidth. To
review the required signal level and its effect from distance and hardware selected, please use the ESTeem RF Design program
available from our web site (www.esteem.com
). Please note that the data rates can be greatly affected by overall activity on the
radio channel and the total background noise. These values should be used as a guide, but testing after installation is required.
LONG RANGE POINT TO POINT APPLICATIONS
The factory configuration on the 195C/M is optimized for distances up to 10 miles. If your application has an RF link with a range
greater than 10 miles, you will need to set the maximum range value on both ESTeem 195C/M’s on this communication link. To
access the Maximum Distance value select Advanced from the top Menu then Wireless LAN Settings>wlan0 device and press
the Next button (Figure 5).
Scroll down the menu list until you find the Maximum Distance variable (Figure 6). Enter the maximum distance of the
connection in miles. At the bottom of the screen press Return to Advanced button and then Commit and Reboot button (Figure
5) to save the information.
Figure 5: Advanced Features Screen
Figure 6: Maximum Distance Value Entry