User's Manual
Table Of Contents
- Chapter 0 - Front Cover 195CM
- Chapter 0 - Table of Contents 195CM
- CHAPTER 1 – Introduction
- Before You Begin
- Model 195C/M Overview
- Three Configuration Phases
- Model 195C/M Hardware Description
- Modes of Operation Description and Examples
- Programming Examples
- CHAPTER 5 – Web Configuration
- Logging Into Web Configuration Manager
- Web Configuration Manager
- CHAPTER 6 – Serial Configuration and Applications
- Using USB Programming Port
- Using RS-232 Data Port
- ESTeem Mesh Network
- Rapid Spanning Tree Protocol (RSTP)
- Spanning Tree Protocols (STP)
- Redundant Backup
- CHAPTER 8 – Antenna Setups
- Antenna and Cable Configurations
- Weatherproofing Coaxial Cable Connections
- APPENDIX A – FCC Information
- APPENDIX B – Interface Ports
- APPENDIX C – Radio Configuration
- APPENDIX E – Troubleshooting
- APPENDIX F – 195C/M Specifications
- CHAPTER 1 – Introduction
- Chapter 1 - Introduction 195CM
- BEFORE YOU BEGIN
- MODEL 195C/M OVERVIEW
- The ESTeem Model 195C and 195M are wireless modem transceivers that can be used to build many types of Wireless Local Area Networks (WLAN). The ESTeem 195C/M series have multiple serial (RS-232, RS-422 and RS-485), Ethernet and 4/20mA sensor interfaces. The Model 195C and 195M can be configured for multiple modes of operation depending upon the needs of the wireless and wired network. The following interface configurations are provided as an overview of the basic network types, as all possible network configurations can not be listed. For further help in selecting the correct network type, please refer to Chapter 3 of this User’s Manual or call Customer Support at 509-735-9092.
- SERIAL APPLICATIONS
- ETHERNET APPLICATIONS
- Chapter 2 - Starting Out 195CM
- Chapter 3 - Example Applications 195CM
- Chapter 4 - Repeating 195CM
- Chapter 5 - Ethernet Configuration and Applications 195CM
- Chapter 6 - Utilities and Features 195CM
- ESTeem Network Configuration Utility (ENC)
- Note: The ESTeem Resource Disk is a stand-alone copy of the ESTeem Web site (Figure 2). Navigation of the Resource Disk is as simple as using your web browser. All technical documentation, User’s Manuals and the ESTeem Utility Program are available on the disk.
- Note: If the page does not auto load, open your web browser and set your address line to D:\index.html (Where D: is the drive letter for your CD-ROM drive).
- Note: This program is saved in a compressed file format.
- Note: The SSID, Mode of Operation and Modem ID will be adjusted through the ENC Utility or the Web Configuration Manager...
- Note: The ESTeem Resource Disk is a stand-alone copy of the ESTeem Web site (Figure 1). Navigation of the Resource Disk is as simple as using your web browser. All technical documentation, User’s Manuals and the ESTeem Utility Program are available on the disk.
- Note: If the page does not auto load, open your web browser and set your address line to D:\index.html (Where D: is the drive letter for your CD-ROM drive).
- Note: This program is saved in a compressed file format. Microsoft Windows XP® will open the file directly, but other operating systems will require a common compression program such as WinZip available for download at http://www.winzip.com
- Note: This Utility will only operate with an ESTeem Model 195C/M in EtherStation mode.
- Chapter 7 - Antenna Setup 195CM
- Apx A - Software Commands 195CM
- Apx B - Interface Ports 195CM
- Apx C - Model 192 Integration 195CM
- Apx D - FCC Information 195CM
- Apx E - 195C Specifications
- Apx F - 195M Specifications
CHAPTER 6
UTILITIES & FEATURES
Revised: 24 Jan 14 6-10 EST P/N AA107-195CM
Simple Network Management Protocol (SNMP)
The ESTeem 195C/M supports SNMP Version 1 (SNMPv1) and Version 2 (SNMPv2c) protocol. This protocol enables any
SNMP server to view the status of the wireless network while the system is in operation. The following are a list of the
Management Information Base (MIB) items that are supported in the ESTeem 195C/M and their MIB location:
MIB Name MIB Directory Location Notes
System Temperature EST-MIB::sysInternalTemp.0 in C * 1000
Uptime
HOST-RESOURCES-
MIB::hrSystemUptime.0 System Update
ModemID EST-MIB::sysIdentifier.0 User-specified “nickname” for ESTeem
Serial Number EST-MIB::sysSerialNumber.0 ESTeem serial number
Model EST-MIB::sysModel.0 ESTeem model number
Firmware Version EST-MIB::sysFirmwareRevision.0 Firmware revision
System Mode EST-MIB::sysMode.0 AP_BRIDGE/STA_ETHERSTA, etc
Free Memory UCD-SNMP-MIB::memTotalFree.0 Total Free Memory
Idle CPU UCD-SNMP-MIB::ssCpuIdle.0 Percentage of CPU Idle
[[ per-interface ]]
IP Address IF-MIB::ifAddress
Port Speed IF-MIB::ifSpeed In bps
Port Status IF-MIB::ifOperStatus
Mac Address IF-MIB::ifPhysAddress
[[ per-wlandev entry ]] EST-MIB::wirelessDevicesNumber.0 Wireless Port Identification
Device Name EST-MIB::wirelessDeviceTable.1.wName.1 Name of device (wlan0 standard)
MAC Address
EST-
MIB::wirelessDeviceTable.1.wMacAddress.
1 MAC address of WLAN port
Mode EST-MIB::wirelessDeviceTable.1.wMode.1
Current Mode ap=access point, sta=station
mode and airscope
Frequency EST-MIB::wirelessDeviceTable.1.wFreq.1 Frequency in MHz
Bandwidth
EST-
MIB::wirelessDeviceTable.1.wBandwidth.1 Bandwidth (5, 10, or 20 MHz if used)
SSID EST-MIB::wirelessDeviceTable.1.wSSID.1 Service Set Identification
BSSID EST-MIB::wirelessDeviceTable.1.wBSSID.1 Basic Service Set Identification
Operational Rates
EST-
MIB::wirelessDeviceTable.1.wOpRates.1 List of RF Data Rates in Rate Set
Basic Rates
EST-
MIB::wirelessDeviceTable.1.wBasRates.1 List of RF Basic Rates for status messages