User's Manual

Table Of Contents
CHAPTER 6
UTILITIES & FEATURES
3. The NTP daemon is enabled by selecting YES for NTP ENABLE (Figure 12). When enabled, the NTP daemon will use
time services from upstream services to keep the time on this system accurate.
4. Next, the NTP SERVICE ENABLE should be configured to “YES,” if you want to allow the system to provide NTP
service for clients wishing time synchronization (Figure 12).
Figure 12: NTP Settings
5. The fi
nal step in configuring NTP services is to enter the IP address or the host name of the upstream NTP server.
Revised: 24 Jan 14 6-8 EST P/N AA107-195CM