User's Manual

CHAPTER 5
ETHERNET APPLICATIONS
The ESTeem Model 195C and 195M have a Full and Half-Duplex Auto-negotiation interface supporting both 10 Mbps and 100
Mbps (10/100BaseT). The port is compatible with TIA/EIA-568B cable configuration (Figure 1). The Ethernet port is used for
both programming the Model 195C/M and data transfer.
Programming Using the Ethernet Port
Figure 1: Ethernet Interface
The
Ethernet port on the 195C/M is used as the
primary interface when programming with the
195 Narrowband Configuration Utility. For
complete information on the use of the utility
program, please refer to Chapter 6 (Utilities and
Features) in the user’s manual. You can also
access the 195C/M via Telnet using the Ethernet
port. The Telnet interface will open a console
port to the ESTeem 195C/M (Figure 2).
Figure 2: Telnet Console Session
Revised: 4 Feb 14 5-1 EST P/N AA107-195CM