User's Manual

TABLE OF CONTENTS
ESTeem Discovery Utility
3-5
Installation --------------------------------------------- 3-5
Operation --------------------------------------------- 3-6
Configuring the IP Address --------------------------------------------- 3-6
Using The RS-232 Interface
3-7
Installing ESTeem Utility Program --------------------------------------------- 3-7
Programming Using the RS-232 Port --------------------------------------------- 3-7
CHAPTER 4 – WEB CONFIGURATION
Logging Into Web Configuration Manager
4-1
Web Configuration Manager
4-2
Top Menu --------------------------------------------- 4-2
Setting ModemID Field --------------------------------------------- 4-2
Status Menu --------------------------------------------- 4-3
System Log Screen --------------------------------------------- 4-5
Setup Screen --------------------------------------------- 4-5
Advanced Configuration Screen --------------------------------------------- 4-6
Backup Screen --------------------------------------------- 4-6
Restore Screen --------------------------------------------- 4-7
Software Update --------------------------------------------- 4-8
System Reboot --------------------------------------------- 4-8
CHAPTER 5 – EXAMPLE CONFIGURATIONS
Programming Example
5-1
Programming Example #1 Diagram --------------------------------------------- 5-1
Programming Example #2 Diagram --------------------------------------------- 5-2
Table 1: Example System Configuration Table --------------------------------------------- 5-2
Example 1 – Plant Network (Access Point Router Repeater)
5-3
Example 2 –Repeater (Access Point Bridge Repeater)
5-13
Example 3 – Remote Building (Access Point Bridge Repeater)
5-18
Example 4 – EtherStation Mode
5-19
Example 5 – Station Router Mode
5-21
Example 6 – Station Masquerade Mode
5-25
CHAPTER 6 – SERIAL APPLICATIONS
Serial Overview
6-1
Serial Connections
6-1
Second Ethernet Port --------------------------------------------- 6-1
Serial Configuration
6-1
Revised: 16 Feb 07 Page 2 EST P/N AA107S