Quick Start Guide

ManualsBrandsElectronic Systems Technology ManualsElectronicsBASE STATION TRANSMITTER

Table Of Contents

BEFORE YOU BEGIN
MODEL 195Ep OVERVIEW
The ESTeem Model 195Ep is a wireless LAN transceiver that can be used to build a Wireless Local Area Network (WLAN) for line-of-sight distances to 13 miles for fixed base and 5 miles for mobile applications at RF data rates up to 11 Mbps. The Model 195Ep is a very sophisticated networking device that can be configured for multiple modes of operation depending upon the needs of the wireless and wired LAN system. The following configuration modes are provided as an overview of the basic network types, as all possible network configurations can not be listed. or further help in selecting the correct network type, please contact Customer Support at 509-735-9092.
MODEL 195Ep CONFIGURATION MODES

CHAPTER 1

INTRODUCTION

Revised: 15 Jun 06 1-1 EST P/N AA107P

BEFORE YOU BEGIN

Thank you and congratulations on your purchase of the ESTeem

Model 195Ep Wireless Ethernet Radio Modem! This manual was

written to help both the first time and advanced user of the 195Ep

configure the radio modem for your application. If this your first

time configuring the 195Ep and you would like to get going as

soon as possible, we recommend using the 195Ep Quick Start

Guide provided with the modem. A copy of the guide is listed in

the appendix of this manual for your reference.

The ESTeem 195Ep is a very versatile wireless Ethernet networking device. To keep the manual usably short, many of the

application descriptions and programming details assume the user has a good working knowledge of the following network

concepts:

• General Ethernet networking and the configuration of LAN topologies

• Common Ethernet terminology and acronyms

• TCP/IP network protocol structure and how to configure TCP/IP networks and subnets

• How to identify and set the TCP/IP address on your computer

• Have administrator privileges to the computer and network you are configuring

• If using routing protocols, you must be able to identify and configure the network routers, gateways and firewalls

• You must be familiar with using web browser software such as Internet Explorer, Netscape or Mozilla

If you are unfamiliar with any of the above networking concepts, you may need to contact your network administrator for

assistance.

MODEL 195Ep OVERVIEW

Figure 1- Access Point Bridge Diagram

The ESTeem Model 195Ep is a wireless LAN

transceiver that can be used to build a Wireless

Local Area Network (WLAN) for line-of-sight

distances to 13 miles for fixed base and 5 miles

for mobile applications at RF data rates up to 11

Mbps. The Model 195Ep is a very sophisticated

networking device that can be configured for

multiple modes of operation depending upon the

needs of the wireless and wired LAN system.

The following configuration modes are provided

as an overview of the basic network types, as all

possible network configurations can not be listed.

or further help in selecting the correct network

type, please contact Customer Support at 509-

735-9092.

Summary of content (4 pages)

PAGE 1
CHAPTER 1 INTRODUCTION BEFORE YOU BEGIN Thank you and congratulations on your purchase of the ESTeem Model 195Ep Wireless Ethernet Radio Modem! This manual was written to help both the first time and advanced user of the 195Ep configure the radio modem for your application. If this your first time configuring the 195Ep and you would like to get going as soon as possible, we recommend using the 195Ep Quick Start Guide provided with the modem.
PAGE 2
CHAPTER 1 INTRODUCTION MODEL 195Ep CONFIGURATION MODES The Model 195Ep can be configured for multiple modes of operation without any changes to the hardware: Access Point Modes 1. Access Point Bridge Mode. When the Model 195Ep is configured as an Access Point it will provide a wireless bridge between hardwired Local Area Network (LAN) networks or individual devices and simultaneously create a wireless canopy for the Model 195Ep modems in client mode.
PAGE 3
CHAPTER 1 INTRODUCTION operation if Model 195Ep is connected directly to the Internet with a static IP address (DSL, T1, etc.) and you want the wireless clients to access the information through the Model 195Ep (Figure 3). This mode should also be used for attaching the Model 195Ep to a network where few IP addresses are available or a firewall for the wireless clients is required. 4. Access Point Repeater. The Access Point Repeater is a unique enhancement of the 802.
PAGE 4
CHAPTER 1 INTRODUCTION 195Ep in a mobile client application and the connected Ethernet devices will need to be accessible from the Access Point’s LAN network. 8. Station Masquerade Mode. The Station Masquerade Mode is another mode where multiple devices will be connected to a single ESTeem in a mobile or Client application, but unlike the Station Router mode, the Station Masquerate will consolidate all connected Ethernet devices to a single IP address on the network.