Manual

APPENDIX C
INTERFACE PORTS
Revised: 14 Jun 06 APX C-2 EST P/N AA107G
RS-232C PROGRAMMING PORT
CONFIGURATION
RS-232
Programming Port
Model 195Eg Serial Port Interface
The ESTeem Model 195Eg has a proprietary RS-232C
interface in a RJ-45 connector on the front panel. To
interface the 195Eg to the serial port on the computer,
you need ESTeem cable AA0621 that combines a
standard Ethernet patch cable to a 9-pin Female adapter.
The serial port on the ESTeem Model 192E can be used
to access the configuration menu in the ESTeem for
system and network configuration. The ESTeem
communications port operates at 38,400 bps, No Parity,
8 Data Bits and 1 Stop Bit (38,400,N,8,1). Configure
your terminal program to match these settings.
RS-232 PROGRAMMING PORT PIN-OUT TABLE
Ethernet Pin-out
ESTeem Model AA0621
RS-232C Port Pin-Out Table
RJ-45
Pin No.
Function DB-9
Pin No.
4
Signal Ground (GND)
5
5
Receive Data (RxD)
2
6
Transmit Data (TxD)
3