User's Manual Part 2

CHAPTER 4
CONFIGURATION SETUP
Revised: 25 Jun 04 4-4 EST P/N AA107G
9. Select if you will be using security for your wireless network. Enter the SSID for you 802.11g network. The SSID is the
unique identification for your wireless network and all 802.11g devices that share a wireless network MUST have the same
SSID code. This identification code is case sensitive and must NOT contain spaces. Reference Figure 6.
10. Select the encryption level for the wireless network. If you would like to hide the SSID from broadcasting from the Access
Point select Yes. If Yes is selected the Model 195Eg will not send out periodic SSID radio beacons that can be identified
with 802.11b network scanning software. The users of the network will have to know the SSID to enter the network and
security is increased, but if you want the SSID to be broadcasted to the network for easy identification then select No.
Reference Figure 7.
Figure 6: SSID Setup Screen
Figure 7: Encryption Setup Screen